中华人民共和国产品质量认证管理条例 REGULATIONS OF THE PEOPLE

更新时间:2019-08-29 03:21
找法网官方整理
问题相似?直接咨询律师 >
导读:
国务院令第83号(PromulgatedbyDecreeNo.83oftheStateCouncilofthePeople'sRepublicofChinaonMay7,1991,andeffectiveasofthedateofpromulgation)颁布日期:19910507实施日期:19910507颁布单位:国务院ChapterIGeneralPr

  国务院令第83号

  (Promulgated by Decree No. 83 of the State Council of the People's Republic of China on May 7, 1991, and effective as of the date of promulgation)

  颁布日期:19910507  实施日期:19910507  颁布单位:国务院

  Chapter I General Provisions

  Article 1 These Regulations are formulated in order to ensure quality of products, improve the credibility of products, safeguard the interests of the users and consumers, facilitate international trade, and promote international cooperation in quality certification.

  Article 2 Product quality certification (hereinafter referred to as certification) is an activity of a certification body, on the basis of product standards and the relevant technical requirements and through its confirmation and issuance of a certificate and certification mark, to certify a product as in conformity with the relevant standards and technical requirements.

  Article 3 When a product has its national or sector standards to refer to, an enterprise may apply for its certification to the sector certification committee set up either by the competent department of the standardization administration under the State Council or by other departments authorized by the competent department.

  Products subject to the provisions of the State laws, administrative regulations, or rules formulated by the competent department of the standardization administration under the State Council together with the relevant administrative departments under the State Council that without being certified they may not be marketed, imported or used, shall be treated according to the State laws, administrative regulations or rules.

  Article 4 Certification is classified as safety certification and conformity certification.

  Products under safety certification must conform to the requirements of the relevant compulsory standards stipulated in the Standardization Law of the People's Republic of China (hereinafter referred to as the Standardization Law)。[page]

  Products under conformity certification must conform to the requirements of the national or sector standards provided for by the Standardization Law.

  Article 5 The certified products shall, except for inspections subject to the State laws and administrative regulations, be exempt from any other inspection and enjoy such State prescribed preferential treatments as higher price for higher quality or priority in recommendation for national excellent quality appraisal.

  Article 6 The competent department of the standardization administration under the State Council shall be in charge of the unified administration of certification throughout the country. Sector certification committees set up either directly by the competent department of the standardization administration under the State Council or by other administrative departments under the State Council with authorization of the competent department shall be responsible for the actual operations of the certification work.

  Chapter II Organization and Management

  Article 7 The functions of the competent department of the standardization administration under the State Council in the management of the certification work are as follows:

  (1) formulating principles, policies, plans and programmes for certification;

  (2) unifying or approving patterns of certification marks;

  (3) examining and approving the compositions and articles of association of the certification committee;

  (4) examining and approving the certification testing bodies;

  (5) registering and administering certification inspectors;

  (6) examining and approving and issuing catalogues of products to be covered by certification;

  (7) publishing directories of certified products and their producers;

  (8) being responsible for conducting international activities in certification;

  (9) coordinating and settling major issues in certification work; and(10) supervising the operation of certification work.[page]

  Article 8 A certification committee shall be composed of experts from the relevant departments of production, marketing, utilization, scientific research and quality supervision of products and its tasks are as follows:

  (1) proposing draft catalogues of products to be covered by certification;

  (2) formulating specific measures for the operation of certification;

  (3) ratifying national or sector standards for the certification purpose;

  (4) recommending testing bodies which shall undertake certification tasks;

  (5) accepting and handling applications for certification;

  (6) organizing the quality system audit of an enterprise applying for certification;

  (7) approving certification, issuing certificates and filing it with the competent department of the standardization administration under the State Council;

  (8) settling the disputes involved in certification;

  (9) being responsible for supervisions and inspections of certified products and their producers; and

  (10) revoking certificates according to law.

  Article 9 The competent departments of the standardization administration of the local people's governments at or above the county level shall exercise supervisions and inspections over certified products within their administrative areas and their tasks are as follows:

  (1) investigating and dealing with products which do not conform to the standards applied to when being certified, or products bearing counterfeit certification marks;

  (2) cooperating with the certification committees in supervising the quality of certified products; and

  (3) investigating and dealing with any other act concerning certification which is against the laws, administrative regulations or rules formulated by the competent department of the standardization administration under the State Council together with the relevant administrative departments under the State Council.[page]

  Chapter III Qualifications and Procedures

  Article 10 Any Chinese or foreign enterprise may apply for certification. An applying enterprise shall have the following qualifications:

  (1) its product meets the requirements of national or sector standards;

  (2) its product can be produced in normal serial production with stable quality; and

  (3) the quality system of the producing enterprise conforms to the national standards for quality control and quality assurance and to the supplementary requirements thereof.

  Article 11 An enterprise shall apply for certification in accordance with the following procedures:

  (1) A Chinese enterprise shall submit its written application to the certification committee. A foreign enterprise or its sale agent shall submit its written application to the competent department of the standardization administration under the State Council or to the certification committee designated by the competent department;

  (2) The certification committee shall inform the testing bodies to conduct testing of the product;

  (3) The certification committee shall conduct quality system audit of the producing enterprise applying for certification; and

  (4) The certification committee shall issue a certificate and give permission for the use of a certification mark to the product which is qualified for certification.

  Product testing and quality system audit of a foreign enterprise may be carried out by foreign certification bodies on commission of certification committees designated by the competent department of the standardization administration under the State Council according to bilateral or multilateral agreements.

  Article 12 Enterprises which have obtained the certificates are subject to supervisions and inspections by the certification committees over their products and quality systems.

  Supervisions and inspections over the products and quality systems of the foreign enterprises which have obtained the certificates may be carried out by foreign certification bodies on commission according to bilateral or multilateral agreements.[page]

  Article 13 When the standard applied to a certified product or the quality system of an enterprise has changed to such an extent that the product is no longer up to the qualifications it had when it was certified, the enterprise shall cease using the certification mark.

  Chapter IV Testing Bodies and Inspectors

  Article 14 Testing bodies shall be examined and accredited by the competent department of the standardization administration under the State Council before they engage in certification testing.

  Article 15 Certification inspectors shall be trained and assessed, and registered by the competent department of the standardization administration under the State Council before they carry out inspections over enterprises applying for certification (including enterprises which have received certificates)。

  Article 16 Testing bodies and inspectors undertaking certification tasks shall perform their functions and obligations set by the competent department of the standardization administration under the State Council and relevant certification committees and be subject to their supervision and check-up.

  Article 17 Testing bodies and inspectors undertaking certification tasks shall be accountable for the test reports and inspection reports they present, keep technical secrets of the certified products, and may not illegally possess the scientific and technological achievements of others.

  Chapter V Penalty Provisions

  Article 18 Any act concerning certification which violates laws, administrative regulations or rules jointly formulated by the competent department of the standardization administration under the State Council and the relevant administrative departments under the State Council shall be subject to penalty in accordance with the provisions of laws, administrative regulations or rules.

  Article 19 Should a certified product being delivered and marketed with the certification mark fails to meet the standards applied to when being certified, the competent department of the standardization administration shall order cessation of its sales and impose a fine not exceeding twice times the amount of the illegal gains.[page]

  Should a product either uncertified or failing to pass the certification be delivered and marketed with a certification mark, the competent department of the standardization administration shall order cessation of its sales and impose a fine not exceeding three times the amount of the illegal gains, and a fine not exceeding 5,000 yuan (RMB) may be imposed on the person in charge of the law-breaking unit.

  A fine not exceeding three times the amount of the illegal gains shall be imposed by the competent department of the standardization administration for transfer of the certification mark, and a fine not exceeding 5,000 yuan (RMB) may be imposed on the person in charge of the lawbreaking unit.

  Article 20 In either of the following cases, the certificate shall be revoked by the certification committee which conferred it:

  (1) The quality of the certified product has deteriorated seriously, or the quality system of the producing enterprise is no longer up to the qualifications it had when being certified, which has caused losses and damages to users or consumers.

  (2) The supervision and inspection conclude that the certified product does not conform to the standards, for which the producing enterprise is responsible.

  Article 21 Should a certified product fails to meet the certification requirements but has been delivered and marketed, the producing enterprise shall guarantee its repair, exchange and refund. The producing enterprise shall be liable for compensation according to law when the product has caused losses and damages to users or consumers.

  Article 22 Anyone engaged in the certification management, testing and inspection who transgresses law, neglects his duties or practises favouritism and irregularities shall be subject to administrative sanctions by his employing unit. When a crime is constituted, the offender's criminal responsibilities shall be investigated by judicial authorities according to law.

  Article 23 If a party disagrees with a pecuniary penalty, an application for reconsideration of the case may be lodged within 15 days on receipt of the notification of the penalty with the administrative authorities at the next higher level of the authorities which made the penalty decision. If a party still disagrees with the decision of reconsideration, a suit may be brought to the people's court within 15 days on receipt of the decision of reconsideration. A party may also bring a suit to the people's court directly within 15 days on receipt of the notification of the penalty. The authorities which made the penalty decision shall apply to the people's court for compulsory enforcement of the decision, in case a party fails both to apply for reconsideration or initiate legal proceedings with a people's court and to comply with the penalty decision within the specified period.[page]

  Chapter VI Supplementary Provisions

  Article 24 Certification fees shall be charged and collected from enterprises applying for certification according to the non-profit-making principle. The specific measures for charging shall be laid down separately by the competent department of the standardization administration under the State Council together with the pricing authorities of the State Council.

  Article 25 Commodity inspection bodies may carry out quality certification work on import and export commodities according to agreements signed between the national commodity inspection department and the relevant foreign bodies or on commission of the relevant foreign bodies.

  Article 26 These Regulations do not apply to military products.

  Article 27 The competent department of the standardization administration under the State Council shall be responsible for the interpretation of these Regulations.

  Article 28 These Regulations shall come into force as of the date of promulgation.

温馨提示:法律问题具有较强的专业性,如有疑问,建议一对一咨询专业律师
声明:该作品系作者结合法律法规、政府官网及互联网相关知识整合,如若内容错误请通过【投诉】功能联系删除。
大家都在问
我也要提问 >
请问产品质量认证机构都有哪些
有下列法规:建筑工程勘察、设计、施工的质量必须符合国家有关建筑工程安全标准的要求,具体管理办法由国务院规定。有关建筑工程安全的国家标准不能适应确保建筑安全的要求时,应当及时修订等等。
什么是产品质量认证的基本依据
产品质量认证的种类: 1、产品质量认证分为安全认证和合格认证。 2、安全认证 凡根据安全标准进行认证或只对商品标准中有关安全的项目进行认证的,称为安全认证。它是对商品在生产、储运、使用过程中是否具备保证人身安全与避免环境遭受危害等基本性能的认证,属于强制性认证。 实行安全认证的产品,必须符合有关强制性标准的要求。 3、合格认证 合格认证是依据商品标准的要求,对商品的全部性能进行的综合性质量认证,一般属于自愿性认证。实行合格认证的产品,必须符合《标准化法》规定的国家标准或者行业标准的要求。
尚未申请工作认证前,做好司法认证,评级8,由工地老板叫来认证
劳动者因工作受伤,符合工伤条件的,用人单位应当在工伤发生起一个月内向工伤保险部门申报单位不申报的,劳动者及其近亲属可以在一年以内自行向工伤保险部门申报用工单位缴纳工伤保险的,由工伤保险基金支付赔偿;未缴纳的,则由单位自行承担注意,以上是符合工伤条件的情形。如果不符合工伤条件(如老板无用工资质,系一般雇佣),无法构成劳动关系,则不能构成工伤,因按照侵权责任法来按责任分担
律师解答动态
引起险情人应打120救助孩子:危险因她引起的应承担赔偿责任。
你好,你说的情况需要根据具体情况具体分析
吴亮律师
吴亮律师
5分钟前
把11.5克黄金换成7.14克,得看这过程有无欺诈、胁迫等情形。要是换金时双方自愿且对重量等情况都清
您好,您具体遇到了哪方面的法律问题。
你好你这个肯定是没有办法p
我也要提问
相关文书下载